Connecting Evo 60m/600Hz/3m to Pixhawk Autopilots

In this tutorial, we will explain how to connect a TeraRanger Evo sensor to a Pixhawk board through the I2C interface and how to setup PX4 or ArduPilot firmware to enable TeraRanger Evo sensor use. TeraRanger Evo Connection to Pixhawk Autopilots manual https://www.terabee.com/connection-to-pixhawk-autopilots-teraranger-evo/ See the product at: https://www.terabee.com/sensors-modules/lidar-tof-range-finders/ Official Site: https://www.terabee.com/